Skip to content
Centridae
Zurück zum Blog

Orgelkoralle-Guide

Von Centridae4 Min. Lesezeit

This Soft (Tubiporidae) coral is rated moderate difficulty and requires PAR levels of 100–200 with medium flow. It derives most of its nutrition from photosynthesis via its symbiotic zooxanthellae. Best placed in the mid rock area of the tank, it has low aggression.

Steckbrief

TypeSoft (Tubiporidae)
DifficultyModerate
PAR range100–200
FlowMedium
FeedingPhotosynthetic + phyto
Growth rateSlow
AggressionLow
PlacementMid rock

Lichtbedarf

Provide PAR levels of 100–200 µmol for optimal health and coloration. Moderate accuracy in lighting is sufficient, but consistency matters more than hitting exact numbers. When first placing the coral, start with lower light intensity and gradually increase over 1–2 weeks to prevent light shock.

Spectrum matters as well: a mix of blue (420–480 nm) and white light produces the best fluorescence and growth. Many hobbyists run heavier blue spectrums to enhance coral fluorescence while maintaining enough PAR for photosynthesis.

Strömungsbedarf

Medium, indirect flow works best. The coral should sway gently in the current without being pummeled. Avoid direct powerhead output aimed at the coral. Alternating flow patterns (wave mode) are beneficial for nutrient delivery and waste removal. Adjust flow based on polyp extension—if polyps remain retracted, flow may be too strong.

Platzierung

Place this coral in the mid rock area of your aquascape. This coral has low aggression and plays well with neighbors. Standard spacing of 1–2 inches is usually sufficient, though growth patterns should be monitored over time.

Secure the coral to rockwork using reef-safe gel super glue or epoxy. Ensure it is stable and won't topple—falling corals get stressed and damaged. Let the glue cure briefly before returning the frag to the tank.

Fütterung

This coral is primarily photosynthetic and derives most of its nutrition from light. Supplemental feeding is not strictly necessary but can boost growth and coloration. Broadcast feeding with phytoplankton, amino acid supplements, or dissolved coral foods benefits the colony. Maintain appropriate nutrient levels (nitrate 2–10 ppm, phosphate 0.02–0.08 ppm) to feed the symbiotic zooxanthellae.

Fragmentierung

Fragging soft corals is straightforward. Use sharp scissors or a razor blade to cut a section from the parent colony. Attach the frag to a plug or rubble using gel super glue. Soft corals heal quickly and frags typically recover within a few days. Some soft corals like leather corals may shed a waxy coating after fragging—this is a normal healing response.

Häufige Probleme

  • Tissue recession or bleaching: Usually caused by unstable parameters, excessive light, or chemical aggression from neighboring corals. Investigate recent changes in lighting, dosing, or new coral additions.
  • Failure to extend polyps: Check flow strength (too strong?), lighting intensity, and water quality. Recent dipping or transport stress can also cause temporary retraction.
  • Pests: Inspect for flatworms, nudibranchs, or other parasites. A prophylactic coral dip (Coral Rx, Bayer) upon introduction prevents most pest issues.
  • Slow growth: Ensure adequate feeding, stable alkalinity (8–11 dKH), calcium (400–450 ppm), and magnesium (1300–1400 ppm). SPS corals especially need stable, consistent alkalinity for skeleton building.

Häufig gestellte Fragen

Is this coral good for beginners?

This coral is suitable for intermediate reef keepers who have stable water parameters and some experience with coral care. Beginners should start with easier species and work up to this one.

What PAR level does this coral need?

Aim for PAR levels of 100–200 µmol at the coral's position. Use a PAR meter to verify actual light levels in your tank, as fixture specs and manufacturer claims often differ from real-world measurements.

How fast does this coral grow?

Growth rate is slow. Factors that influence growth include lighting intensity, flow, feeding regimen, and stable water chemistry. Consistent alkalinity and calcium are the primary drivers of calcification rate in stony corals.

Verwandte Artikel

Zurück zum Einsteiger-Hub.